- Free Delivery
On all orders over £100
- Special Pricing Available
Contact us for more details
-
Trustpilot Rated
Kranze Oil / Diesel Heated Series | Therm CA11/130T Hot Water Pressure Washer - with 20M Hose Reel 240V - 414601
The CA 11/130 is an excellent compact design, and a powerful hot and cold pressure washer running on an ordinary UK 3-pin plug (240 volt) Durable design for industrial and commercial use.
The pressure of the CA 11/130 can be fully adjusted and at maximum will give nearly 1900 psi. This is actual pressure at the nozzle, unlike low pressure chemical injectors, here the actual pressure is around 30% higher than traditional systems - something true of any pressure washer with low pressure chemical option.
The boiler unit or combustion chamber is probably the best used on any make of mobile steam cleaner. Most on the market are formed out of a thin tin like material. Kranzle therm casings are machined out of 1/4" inch galvanized plate steel.
The flame chamber is within an inner cylinder ensuring that the flame does not directly touch the coil. This refinement eliminates sooting up - a common problem with other steam cleaners that leads to smoky exhaust, poor efficiency and higher servicing costs. Kranzle are renowned for low servcing costs and excellent efficiency. The Kränzle CA Series Therms are equipped with an optical flame monitoring viewing window.
The Kranzle coil has a huge surface area of over 22 square feet and because both the fuel and air are pre-heated, combustion of the fuel and the water heating process is extremely efficient. Therm's have been designed with simple maintenance taken into account. Every Therm machine is fitted with both an easy to clean fuel filter and a fuel pressure gauge. Low fuel cut out is standard, as is pre-purge venting.
The output temperature is adjustable with a steam stage of up to 150°C. Detergents can be used at high pressure giving the maximum cleaning combination of high temperature, high pressure and chemical.
When you let go of the trigger gun, the CA 11/130 will switch off to stand-by mode, and will restart when you go back to squeeze the trigger again. All connections are brass screw fittings sealed by an O ring, so no tools are needed to change accessories or pack away. There are storage compartments for the trigger gun and lance built into the casing of the machine.
A one piece M2000 gun and lance, 5M of power cable complete with UK plug come as standard with all machines, models without the hose drum come with 10 M of high pressure hose. Optional T-Series comes with hose drum, inc. 15 M high pressure hose.
A major advantage to the new generation of pressure washer from Kranzle is that you can clean with detergents and degreasers at high pressure.
This is a big help when cleaning engine compartments, gearboxes or pre-MOT cleaning on HGVs. It also increases the effectiveness of cleaning where hygiene and BIO-SECURITY is essential such as on farms, in areas with livestock, kennels or any food handling areas.
The water tank on a Therm also protects the pump from being starved of water. On a conventional pressure washer attached to a tap via a hose if there is not enough water flow to the pump the pistons inside are held forward by the vacuum that forms on the inlet. This causes knocking in the transmission and serious damage to the pump if not rectified. The water tank on the CA 11/130 acts as a buffer between the water mains and the pump and compensates for fluctuations in the supply - protecting the pump.
Therms are easy to use, versatile, well designed, easy to maintain and have long life expectancy. Every effort is made to make the machine that is the best on the market and yet still affordable. This is it, overall an excellent value for money machine and exceptionally durable.
| Pump Pressure | Operating Pressure 30-130 bar |
|---|---|
| Water Flow Rate | 11 litres per minute (660l/h) |
| Speed (RPM) | 1400rpm |
| Mains Cable Length | 5 metres |
| Voltage | 230/240 volt |
| Weight (Kg) | 175 |
| Dimensions (H x L x D) | 79 x 59 x 98 |