On all orders over £100
Contact us for more details
Trustpilot Rated
Description
Low foaming, fast acting emulsion polish stripper
Features & Benefits
• Contains powerful chemical stripping agents
• Heavy duty cleaner degreaser
Areas of Use
• Suitable for use on vinyl, thermoplastics, asphalt, composition, terrazzo, marble, finished concrete, quarry tiles, ceramic tiles and all sealed wood and cork floors
• Can also be used on linoleum and rubber but treat with care
PPE Required
Directions For Use
Removal of Emulsion Floor Dressings, Grease & Dirt:
• (Using a floor machine or automatic scrubber dryer)
Dilute 1:25 (200ml of Kontrol SuperStripper to 5 litres of cold water)
• A stronger solution may be used if required
General Cleaning:
• (on all types of floors, sealed wood, marble and terrazzo)
Dilute 1:50 (100ml of Kontrol SuperStripper to 5 litres of cold water)
Cleaning Surfaces by Hand:
• Dilute 1:25 (25ml of Kontrol SuperStripper in a 600ml trigger spray bottle filled with cold water)
Stripping Light Coatings of Floor Polish by Hand:
• Dilute 1:12 (400ml Kontrol SuperStripper in 5 litres of cold water)
• allow to soften the dressing for approximately 10 minutes before agitating with a mop or nylon pad
• Remove slurry by mopping or wet-suction vacuum
• When operating a single brush floor scrubbing machine or an automatic scrubber dryer. Allow a short time for the solution to soak and soften the floor dressing before
scrubbing with a black stripping pad. Vacuum up the slurry.
• When using an automatic scrubbing machine, double scrub leaving the vacuum off on the first pass, then vacuum up the slurry on the second pass.
• Finally, it is recommended you rinse the floor to ensure that all the slurry residue has been removed before applying Kontrol Emulsion Floor Polish
Diltution Rate Product:Water | I part to 50 parts water |
---|---|
Unit of Measure | Each |
Pack Size | Case of 2x5 litre |